FixVault
Home › Pontiac › 2009 › Torrent Base, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - AF33-5 - Introduction › Specifications › Transmission Clearance Specifications

Transmission Clearance Specifications

Transmission Clearance Specifications

Application Specification
Metric English
Front Differential Assembly (13)
  • Unloaded Rotating Torque
 0.70-1.20 N.m 6-11 lb in
Fluid Pump Assembly (2)
  • Driven Gear (204) to Body Clearance
 0.075-0.20 mm 0.002-0.007 in
  • Drive Gear (205) Tip to Body Clearance
 0.013-0.342 mm 0.0005-0.014 in
  • Driven Gear (204) Tip to Body Clearance
 0.004-0.298 mm 0.0001-0.018 in
  • Fluid Pump Body Bushing, ID
 38.113-38.188 mm 1.500-1.503 in
  • Side Clearance of Drive and Driven Gear to Body
 0.03-0.10 mm 0.0012-0.004 in
  • Stator Shaft Bushing, ID
 22.201-22.257 mm 0.874-0.876 in
Front Carrier Sun Gear Assembly (24)
  • Front Carrier Bushing, ID
 30.056-30.132 mm 1.183-1.186 in
  • Front Sun Gear Bushing, ID
 22.200-22.276 mm 0.874-0.877 in
  • Rear Sun Gear Bushing, ID
 22.200-22.276 mm 0.874-0.877 in
2nd Coast Clutch and 2nd Clutch Hub and 2nd Clutch Sprag Assembly (11) to Fluid Pump
  • Installed Height
 51.09-51.71 mm 2.011-2.036 in
Forward and Direct Clutch Assembly (23) End Play
  • Installed End Play
 0.188-0.570 mm 0.007-0.022 in
Forward and Direct Clutch Assembly (23) to Transmission Case (17)
  • Installed Height
 50.850-51.825 mm 2.002-2.040 in
Front Differential Gear Thrust Bearing (263) to case (17)
Installed Height 0.05-0.20 mm 0.002-0.008 in
3rd Gear Band Servo (57) Return Springs
  • Outer Spring
  • Free/Relaxed Length
 40.2 mm 1.582 in
  • Outer Diameter
 20.3 mm 0.800 in
  • Inner Spring - yellow
  • Free/Relaxed Length
 13.5 mm 0.531 in
  • Outer Diameter
 10.0 mm 0.394 in
3rd Gear Band Servo (57)
  • Piston Bore Stroke
 5.76-6.76 mm 0.227-0.266 in
Transmission Housing - Torque Converter Distance
  • Torque Converter mounting lug/pad minimum installed distance to Transmission Housing outer edge
 11.35 mm 0.447 in
Clutch Assembly Specifications

Application Specification
Metric English
Direct Clutch (562)
  • Piston Bore Stroke
 1.49-1.91 mm 0.059-0.075 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.76-1.24 mm 0.030-0.049 in
  • Available Direct Clutch Backing Plate (555) Thickness
 4.0 mm 0.157 in
4.2 mm 0.165 in
4.4 mm 0.173 in
Forward Clutch (565)
  • Piston Bore Stroke
 0.71-1.09 mm 0.028-0.042 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.74-1.06 mm 0.029-0.042 in
  • Available Forward Clutch Backing Plate (551) Thickness
 5.0 mm 0.197 in
5.2 mm 0.205 in
5.4 mm 0.213 in
Low and Reverse Clutch (27)
  • Piston Bore Stroke
 1.39-2.21 mm 0.054-0.087 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.43-1.43 mm 0.017-0.056 in
1-2 Reverse Clutch (603)
  • Piston Bore Stroke
 2.34-2.70 mm 0.092-0.106 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.84-1.63 mm 0.033-0.064 in
  • Available 1-2 Reverse Clutch Backing Plate (621) Thickness
 5.0 mm 0.197 in
5.1 mm 0.201 in
5.2 mm 0.205 in
5.3 mm 0.209 in
5.5 mm 0.216 in
Second Clutch (210)
  • Piston Bore Stroke
 1.10-1.50 mm 0.043-0.059 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.44-1.04 mm 0.0173-0.040 in
  • Available 2nd Clutch Backing Plate (219) Thickness
 3.6 mm 0.142 in
3.8 mm 0.150 in
4.0 mm 0.157 in
Second Coast Clutch (222)
  • Piston Bore Stroke
 1.24-1.96 mm 0.049-0.077 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.53-1.59 mm 0.021-0.063 in
4-5 Clutch (582)
  • 4-5 Clutch Housing Bushing, ID
 36.125-36.200 mm 1.422-1.425 in
  • 4-5 Clutch Piston Stroke
 1.52-1.90 mm 0.060-0.075 in
Relaxed Clutch Pack Stack Up Clearance 0.60-1.36 mm 0.024-0.054 in
Available 4-5 Clutch Backing Plate (567) Thickness 3.6 mm 0.142 in
3.8 mm 0.150 in
4.0 mm 0.158 in
About FixVault