Rear Window Switch
- Ignition OFF, disconnect the harness connector at the appropriate rear window switch.
- Test for infinite resistance between the control terminals 1 and 4 and the control terminal 5 with the switch in the INACTIVE position.
- If less than the specified value, replace the window switch.
- Test for less than 2 ohms between the control terminal 4 and the control terminal 5 with the switch in the UP position.
- If greater than the specified range, replace the rear window switch.
- Test for less than 2 ohms between the control terminal 1 and the control terminal 5 with the switch in the DOWN position.
- If greater than the specified range, replace the rear window switch.