FixVault
Home › Pontiac › 2009 › Torrent Base, FWD › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Positive Cable Replacement (LNJ) › Installation Procedure

Installation Procedure

    Fig 1: Identifying Positive Battery Cable Terminal To Starter Solenoid Nut
    GM1916156Courtesy of GENERAL MOTORS CORP.
  1. Install the positive battery cable to the wire loom and re-tape the loom.
  2. Install the battery cable retainer (4) to the transaxle selector cable bracket.
  3. Install the positive battery cable lead (2) to the starter solenoid.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the positive battery cable terminal to starter solenoid nut (1) and tighten to 10 N.m (89 lb in).
  5. Lower the vehicle.
    6. Fig 2: View Of Battery Cables & Terminal Nut
    GM1822394Courtesy of GENERAL MOTORS CORP.
  6. Connect the positive and negative battery cable clip (3) to the battery tray support bracket.
  7. Connect the positive and negative battery cable clip to the side of the battery tray support bracket.
  8. Install the battery box. Refer to Battery Box Replacement .
    9. Fig 3: View Of Battery Terminals
    GM1822582Courtesy of GENERAL MOTORS CORP.
  9. Install the positive battery cable terminal (2) to the UBEC stud.
  10. Install the positive battery cable terminal nut (1) to the UBEC stud and tighten the nut to 15 N.m (11 lb ft).
    11. Fig 4: View Of Battery & Battery Box
    GM1822579Courtesy of GENERAL MOTORS CORP.
  11. Install the UBEC cover.
  12. Install the battery. Refer to Battery Replacement .
About FixVault