Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of High Mounted Stop Lamp & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Position the high mounted stop lamp to the spoiler.
Connect the washer hose.
Connect the electrical connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the spoiler to the high mounted stop lamp screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the spoiler to the liftgate. Refer to Spoiler Replacement - Rear in Body Rear End.