FixVault
Home › Pontiac › 2009 › Torrent GXP, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.6L - Introduction › Repair Instructions › Mass Airflow Sensor with Intake Air Temperature Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Wiring Harness Electrical Connector
    GM1834957Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    3. Fig 2: Identifying MAF/IAT Sensor
    GM1834958Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAF/IAT sensor screws.
  4. Remove the MAF/IAT sensor from the air cleaner assembly.
  5. Remove the MAF/IAT sensor seal.
About FixVault