FixVault
Home › Pontiac › 2009 › Vibe Base, 1.8 8, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 1.8L (Lay) - Introduction › Repair Instructions › Ignition Coil Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Locating Ignition Coil Connectors
    GM2016641Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the 4 ignition coil connectors.
    3. Fig 2: Identifying Bolts And Ignition Coils
    GM2016643Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.
  3. Remove the 4 bolts and 4 ignition coils.
About FixVault