FixVault
Home › Pontiac › 2009 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 1.8L (Lay) - Introduction › Repair Instructions › Camshaft Position Sensor Replacement - Intake › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Locating No. 1 Camshaft Position Sensor Connector
    GM2016629Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the No. 1 camshaft position sensor connector.
    3. Fig 2: View Of No. 1 Camshaft Position Sensor Bolt
    GM2016630Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt and No. 1 camshaft position sensor.
About FixVault