FixVault
Home › Pontiac › 2009 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 1.8L (Lay) - Introduction › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the right engine under cover.
  2. Disconnect the crank position sensor connector.
    3. Fig 1: Locating Crank Position Sensor Bolt
    GM2016635Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt and crank position sensor.
About FixVault