FixVault
Home › Pontiac › 2009 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 1.8L (Lay) - Introduction › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Removal Procedure

Removal Procedure

  1. Drain the engine coolant. Refer to Cooling System Draining and Filling .
  2. Remove the engine cover. Refer to Engine Cover Replacement .
  3. Remove the air cleaner cap sub-assembly with hose.
    4. Fig 1: Locating Engine Coolant Temperature Sensor Connector
    GM2016647Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine coolant temperature sensor connector.
    5. Fig 2: View Of Engine Coolant Temperature Sensor
    GM2016648Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine coolant temperature sensor.
About FixVault