FixVault
Home › Pontiac › 2009 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 1.8L (Lay) - Introduction › Repair Instructions › Mass Airflow Sensor Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Caution .
    Fig 1: Identifying Mass Air Flow Meter & Screws
    GM2016622Courtesy of GENERAL MOTORS CORP.
  1. Install mass air flow meter
  2. Install the mass air flow meter with the 2 screws.

    Tighten:  1.0 N.m (9 lb in)

  3. Connect the mass air flow meter connector.
About FixVault