FixVault
Home › Pontiac › 2009 › Vibe Base, 2.4 0, FWD, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System And Remote Functions › Repair Instructions › Remote Control Door Lock Receiver Replacement › Removal Procedure

Removal Procedure

  1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
    2. Fig 1: Removing/Installing Bolt And Transponder Key ECU
    GM2032138Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the connector.
  3. Disengage the clamp.
  4. Remove the bolt and the transponder key ECU.
About FixVault