FixVault
Home › Pontiac › 2009 › Vibe GT, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System And Remote Functions › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Bolt And Transponder Key ECU
    GM2032138Courtesy of GENERAL MOTORS CORP.
  1. Install the transponder key ECU with the bolt.
  2. Engage the clamp.
  3. Connect the connector.
  4. Install the HVAC module. Refer to HVAC Module Assembly Replacement .
About FixVault