FixVault
Home › Pontiac › 2009 › Vibe GT, Automatic › Repair and Diagnosis › Electrical › Body Electrical › Accessory Power Socket › Repair Instructions › Accessory AC and DC Power Control Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the communication interface module. Refer to Communication Interface Module Replacement .
    2. Fig 1: Removing/Installing Bolts And Voltage Inverter Assembly
    GM2033182Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the clamp and connector.
  3. Remove the 3 bolts and the voltage inverter assembly.
About FixVault