FixVault
Home › Pontiac › 2009 › Vibe GT, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.4L (Lax) - Introduction › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal Assembly Components
    GM2016531Courtesy of GENERAL MOTORS CORP.
  1. Remove accelerator pedal assembly.
  2. Disconnect the accelerator pedal position sensor connector.
  3. Remove the 2 bolts and accelerator pedal.
About FixVault