FixVault
Home › Pontiac › 2009 › Vibe GT, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.4L (Lax) - Introduction › Repair Instructions › Ignition Coil Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Caution .
    Fig 1: Identifying Ignition Coils Bolts
    GM2016547Courtesy of GENERAL MOTORS CORP.
  1. Install the 4 ignition coils with the 4 bolts.

    Tighten:  9.0 N.m (80 lb in)

    2. Fig 2: Locating Ignition Coil Connectors
    GM2016546Courtesy of GENERAL MOTORS CORP.
  2. Connect the 4 ignition coil connectors.
  3. Install the engine cover.
About FixVault