FixVault
Home › Pontiac › 2009 › Vibe GT, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.4L (Lax) - Introduction › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove engine cover.
  2. Drain engine coolant.
  3. Remove air cleaner cap sub-assembly with hose.
  4. Remove air cleaner case.
    5. Fig 1: Exploded View Of Engine Coolant Temperature Sensor Connector
    GM2016551Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the engine coolant temperature sensor connector.
    6. Fig 2: Exploded View Of Engine Coolant Temperature Sensor And Gasket
    GM2016558Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine coolant temperature sensor and gasket.
About FixVault