FixVault
Home › Pontiac › 2010 › G5 Base, Automatic › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls And Fuel - 2.2L - Repair Instructions › Repair Instructions › Accelerator Pedal with Position Sensor Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: APP Sensor
    GM1633085Courtesy of GENERAL MOTORS CORP.
  1. Position the accelerator pedal with sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the accelerator pedal bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying Steering Column Filler Panel
    GM1651113Courtesy of GENERAL MOTORS CORP.
  3. Connect the I/P wiring harness electrical connector to the APP sensor.
  4. Install the steering column filler panel. Refer to Steering Column Opening Filler Replacement .
About FixVault