FixVault
Home › Pontiac › 2010 › G5 Base, Automatic › Repair and Diagnosis › Engine Performance › Ignition System › Engine Controls And Fuel - 2.2L - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement - Intake › Removal Procedure

Removal Procedure

    Fig 1: Identifying CMP Sensor Electrical Connector
    GM1647999Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the intake camshaft position (CMP) sensor electrical connector (2).
    3. Fig 2: Identifying CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
About FixVault