FixVault
Home › Pontiac › 2010 › G6 Base, 2D Coupe › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 2.4L - Repair Instructions › Repair Instructions › Evaporative Emission Line Replacement - Engine › Installation Procedure

Installation Procedure

    Fig 1: Evaporative Emission Line - Engine
    GM1889722Courtesy of GENERAL MOTORS CORP.
  1. Install the engine EVAP line (1).
  2. Connect the engine EVAP line quick connect fitting to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Connect the engine EVAP line quick connect fitting to the canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
About FixVault