Removal Procedure

Fig 1: MAF/IAT Sensor Wiring Harness Connector

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.

Fig 2: Air Cleaner Housing Rear Bolt & A/C Condenser/Evaporator Tube Clamp

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner housing rear bolt.
Reposition the air conditioning (A/C) condenser and evaporator tube clamp as required.

Fig 3: Air Cleaner Assembly

Courtesy of GENERAL MOTORS CORP.