FixVault
Home › Pontiac › 2010 › G6 GXP, 4D Sedan › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 3.6L - Repair Instructions › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Fuel Pump Module Wiring Harness Connectors
    GM1796271Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel tank fuel pump module wiring harness electrical connector (2) from the fuel tank pressure sensor.
    3. Fig 2: Fuel Tank Pressure Sensor
    GM1796299Courtesy of GENERAL MOTORS CORP.
  3. Gently pull upward in order to remove the fuel tank pressure sensor from the fuel tank module.
About FixVault