FixVault
Home › Pontiac › 2010 › G6 GXP, 4D Sedan › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 3.6L - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: MAP Sensor & ETC Electrical Connectors
    GM1838990Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector (2) from the electronic throttle control (ETC).
    3. Fig 2: Throttle Body & Bolts
    GM1839345Courtesy of GENERAL MOTORS CORP.
  3. Remove the throttle body bolts.
  4. Remove the throttle body and gasket. Discard the gasket.
About FixVault