FixVault
Home › Pontiac › 2010 › Vibe Base, 1.8 8, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions › Repair Instructions › Fuel Sender Assembly Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel pump. Refer to Fuel Pump and Fuel Filter Assembly Replacement .
    2. Fig 1: Identifying Fuel Sender Gauge Connector & Fuel Sender Gauge Arm
    GM2016807Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel sender gauge connector (1).
    3. NOTE: Make sure that the fuel sender gauge arm does not bend.
  3. Release the lock (2) and slide the fuel sender gage assembly to remove it.
About FixVault