FixVault
Home › Pontiac › 2010 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions › Repair Instructions › Knock Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
    2. Fig 1: Locating Knock Sensor Connector & Bolt
    GM2016661Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the knock sensor connector (2).
  3. Remove the bolt (1) and remove the knock sensor.
About FixVault