FixVault
Home › Pontiac › 2010 › Vibe Base, 1.8 8, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions › Repair Instructions › Mass Airflow Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Mass Air Flow Meter Connector & Screws
    GM2016622Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the mass air flow meter (3) with the 2 screws (3) and tighten to 1.0 N.m (9 lb in).
  2. Connect the mass air flow meter connector (1).
About FixVault