FixVault
Home › Pontiac › 2010 › Vibe Base, 2.4 0, AWD › Repair and Diagnosis › Accessories & Equipment › Memory Modules › Configurable Customer Control System › Repair Instructions › Steering Wheel Control Switch Assembly Replacement › Removal Procedure

Removal Procedure

  1. Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement .
    2. Fig 1: Identifying Steering Wheel Control Switch Assembly
    GM2015027Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the connector (2) from the coil.
  3. Disengage the clamp (3).
  4. Remove the screw (1).
  5. Disengage the 2 pins (4).
  6. Remove the audio control switch from the steering wheel.
About FixVault