FixVault
Home › Pontiac › 2010 › Vibe GT, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 2.4L (Lax) - Repair Instructions › Repair Instructions › Fuel Pressure Regulator Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of O-Rings & Pressure Regulator Assembly
    GM2016690Courtesy of GENERAL MOTORS CORP.
  1. Apply oil to 2 new O-rings (1) and then install them to the fuel pressure regulator assembly.
    2. Fig 2: View Of Fuel Pressure Regulator Assembly
    GM2016693Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel pressure regulator assembly (1).
  3. Install the fuel pump. Refer to Fuel Pump and Fuel Filter Assembly Replacement 
    4. WARNING: Refer to Battery Disconnect Warning .
  4. Connect the cable to the negative battery terminal.
  5. Inspect for a fuel leak.
About FixVault