FixVault
Home › Porsche › 1991 › 911 Turbo › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment Specifications & Procedures › Wheel Alignment Procedures › Camber Adjustment

Camber Adjustment

  1. Loosen 2 strut-to-steering knuckle mounting nuts. Turn upper mounting bolt until front camber is set to specification. See WHEEL ALIGNMENT SPECIFICATIONS . Tighten strut-to-steering knuckle mounting nuts to specification. See TORQUE SPECIFICATIONS .
  2. To adjust rear camber, remove engine and transaxle covers from underside of vehicle. Loosen 2 spring arm bolts. Loosen camber lock nut, and turn camber eccentric until rear camber is set to specification. See WHEEL ALIGNMENT SPECIFICATIONS . See Figure. Tighten camber lock nut and spring arm bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Adjusting Rear Camber & Toe-In Courtesy of Porsche of North America, Inc.
G92B01745
About FixVault