Removing Drive Belt
REMOVAL PROCEDURE FOR DRIVE BELT
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Remove left-hand seat | Disconnect the electrical plug connection. Undo four Torx screws with socket TX 50 (3/8 inch). |
| 2 | Remove rear wall cover on passenger compartment rear wall | Remove rear wall lining. Unscrew seven hexagon-head bolts and two hexagon nuts (a/f 10 mm) and remove cover. |
| 3 | Remove drive belt | Mark belt travel direction with a colored pen. Slacken belt by turning the tensioning pulley (a/f 24 mm) clockwise, hold still and simultaneously take the belt off the drive pulleys. Visually inspect the condition of the belt and replace it if necessary. |