FixVault
Home › Porsche › 2002 › 911 GT2 › Repair and Diagnosis › External Pages › Different car › Section 11 (Automatic Transmission, Controls, Case) › Removing And Installing Deflection Lever › Installation

Removing And Installing Deflection Lever: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate deflection lever axle and bushings with Optimoly TA (available from Porsche Parts Service).
  2. Install deflection level and fit snap ring.
  3. Clip in push rod and press selector lever cable onto axle of the deflection lever as far as it will go.
  4. Check adjustment of the selector lever cable. See ADJUSTING SELECTOR LEVER CABLE  .
About FixVault