Disassembling and assembling front cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Cover

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Disassembling And Assembling Front Cover Components

Courtesy of PORSCHE OF NORTH AMERICA, INC.

FRONT COVER DISASSEMBLING AND ASSEMBLING PROCEDURE

No.	Designation	Qty.	Removal	Installation
1	Covers	1		Adjust cover -1- . See Fig 2 .
2	Rubber pads	2	Unscrew rubber pads -2- . See Fig 2 .	Screw in rubber pads -2- . See Fig 2 .
3	Self-adhesive label tire pressure	1
4	Combination screw M6 x 12	2		Tightening torque:-10 Nm (7.5 ftlb.)-
5	Upper part of the lock		Take upper part of lock -5-1- . See Fig 2 .	Fasten upper part of lock -5-1-4- . See Fig 2 .
6	Tapping nut	2	Unscrew tapping nut -6- . See Fig 2 .	Replace.
7	Badge on cover		Remove base -8-7- . See Fig 2 .	Insert base -8-7-6- . See Fig 2 .
8	Base	1