Disassembling and assembling rear cover: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
REAR COVER REMOVING AND INSTALLING PROCEDURE
| No. | Designation | Qty. | Removal | Installation |
|---|---|---|---|---|
| 1 | Fastening screws | 4 | Unscrew. | Tightening torque -10 Nm (7.5 ftlb.)- |
| 2 | Rear cover | Undo the fastening screws -1-2- . See Fig 2 . | Adjust the covers on the hinges, the upper lock parts and the right and left rubber buffers according to the contours of the convertible-top compartment lid and the side sections. | |
| 3A | Logo -Boxster-Boxster- | 1 | Pull off. | |
| 3B | Logo -Boxster S- | 1 | Pull off. | |
| 4 | Rubber pads | 2 | Remove rubber buffers by turning them. | Screw in rubber buffers. |
| 5 | Combination screw M6 x 12 | 2 | Unscrew. | Tightening torque -10 Nm (7.5 ftlb.)- |
| 6 | Upper part of the lock | 1 | Remove upper part of lock from cover. | Fasten the upper part of the lock with the fastening screws -1- . See Fig 2 . |