Fault code 2613: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Read out fault memory in offroad stabilizer control unit | Go to Step 2 | Remedy faults and read out fault memory again in offroad stabilizer control unit if OK. → End, if not OK. Go to Step 2 |
| 2 | Continue troubleshooting, refer to CHECKING INSTRUCTIONS/CAN DATA BUS . | → End | Go to Step 3 |
| 3 | Replace instrument cluster | → End | |