Fault code 1314: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Read out DME control module fault memory. | Go to Step 2 | Correct faults and read out fault memory in level control module again. If OK: → End If not OK: → Step 2 |
| 2 | Continue troubleshooting, refer to CHECKING INSTRUCTIONS/CAN DATA BUS . | → End | Go to Step 3 |
| 3 | Replace level control module. | → End | |