Fault code 1316: Diagnosis/troubleshooting

DIAGNOSIS/TROUBLESHOOTING PROCEDURE

Work instruction	Display OK	If not OK
1	Read out PSM control module fault memory.	Go to Step 2	Correct faults and read out fault memory in level control module again. If OK: → End If not OK: → Step 2
2	Continue troubleshooting, refer to CHECKING INSTRUCTIONS/CAN DATA BUS .	→ End	Go to Step 3
3	Replace level control module.	→ End

Work instruction

Display OK

If not OK

Read out PSM control module fault memory.

Go to Step 2

Correct faults and read out fault memory in level control module again.

If OK:

→ End

If not OK:

→ Step 2

Continue troubleshooting, refer to CHECKING INSTRUCTIONS/CAN DATA BUS .

→ End

Go to Step 3

Replace level control module.

→ End