FixVault
Home › Porsche › 2012 › Cayenne Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Ignition System › 24 - Fuel System - Electronic Ignition -- 92A Cayenne › WM 247019 Removing And Installing DME Control Unit (All Models) › Replacing DME Control Unit › Notes

Replacing DME Control Unit: Notes

  1. Unscrew four fastening screws -1-  on the bracket.
    Fig 1: Replacing DME Control Unit (Shown As Example)
    G09933718Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw in four fastening screws -1-  on the bracket. → Tightening Torque: 9 Nm (6.5 ft. lb.) 
About FixVault