Calibrating The Level Control Module
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- During coding, it is essential to guarantee the power supply for the PIWIS Tester 9718 . It is essential to connect a battery charger with a current rating of at least 40 A to the vehicle battery.
- The PIWIS Tester 9718 instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations may occur with later software versions.
- The procedure described here has been structured in general terms; different text or additions may appear in the PIWIS tester 9718.
Information, measuring points, procedure, and conditions for calibration: → 4301K2 CALIBRATION
- PIWIS Tester 9718 must be connected to the vehicle before starting it. Switch on ignition. Press [>>] to continue.
- Select vehicle type using the cursor keys.
- Press [>>] to switch from the vehicle type to the list of control units.
- Select Levelling system using the cursor keys and press >>.
- Select Actual values using the cursor keys and press >>.
- Select the Actual values menu and display the security code. Then read out and take note of the security code.
- Select the Calibration menu, enter the security code and execute the Calibration function. Follow the instructions on the PIWIS Tester.
- Read out the fault memory and erase it if necessary.