Removal And Installation: Installation
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
-
- Install the speed control switch.
- Install the retaining screw.
- Connect the electrical connector.
-
NOTE: Make sure that the harness is routed to the position noted on removal.
- Connect the electrical connector.
- Install the paddle shifter.
- Install the retaining screw.
- Install the driver airbag.
Refer to: DRIVER AIRBAG MODULE .
- Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .