DTC B00A0-51: Occupant Classification System - Not programmed: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not attempt to install individual components from the service kit as they are calibrated to function as a single assembly.
- Using the Jaguar Land Rover approved diagnostic equipment, re-configure the occupant classification sensor control module with the latest level software
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position. Clear the DTCs and retest
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If fault persists, install a new occupant classification sensor service kit as required (complete service kit consists of foam, occupant classification sensor bladder mat with attached smart digital pressure sensor)