Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Calibrate the vehicle after installing or replacing the combination sensor. →

Calibration must only be performed with the vehicle >> standing horizontally with the brakes off <<.

Install triggering unit for airbag. → WM 695319 REMOVING AND INSTALLING TRIGGERING UNIT FOR AIRBAG
Install Centre console cover. → 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER
Connect the battery → WM 9000IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (ALL MODELS)
Select >> Calibration Menu<<. Calibrate >> Lateral-acceleration sensor <<and >> Axial-acceleration sensor <<in sequence using the menu.