Installing Control Unit For Distance Measuring Sensor

Information 

Before and after installing the trim cover for the distance measuring sensor control unit, check the following points:

• The distance measuring sensor control unit holder must not be deformed. If it is, carefully push the distance measuring sensor control unit holder back into shape. 
• If the trim cover is damaged or cracked, replace the trim cover. 
• After installing the trim cover, check that it is seated correctly and securely. 

1. Installation is performed in reverse order.
2. Screw in and tighten nuts on control unit for distance measuring sensor. > Tightening torque 9 N.m (6.5 ft lb.)