FixVault
Home › Porsche › 2021 › 718 Boxster Base, Standard Trans › Repair and Diagnosis (Single Page) › Electrical › 27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN › WM, 278555 - Replacing Distance Measuring Sensor Control Unit › Automatically Coding Distance Measuring Sensor Control Unit › Coding Control Unit For Distance Measuring Sensor Automatically

Coding Control Unit For Distance Measuring Sensor Automatically

  1. Select the Codings/adaptations  tab. Press F12 to continue.
  2. Automatic coding  must now be selected. Press F12 to continue.
  3. Wait for confirmation that coding was completed successfully  . Press F12 to continue.
  4. Exit the diagnostic application.
  5. Switch off ignition.
  6. Disconnect the battery charger from the vehicle.
  7. Carry out a test drive and read out the fault memory.
About FixVault