Subsequent Work
WARNING:
Combination sensor not calibrated or calibrated incorrectly
- Unexpected vehicle handling
- Combination sensor does not work
- Malfunction in combination sensor
- Calibrate the vehicle after installing or replacing the combination sensor using > 9818 - PIWIS Tester II.
- Only perform calibration when the vehicle is positioned horizontally and the brake is not actuated.
- Calibrate rotation-rate sensor using > 9818 - PIWIS Tester II.
To do this, select:
- Control unit overview
- PSM
- Maintenance/repairs
- Select Sensor cluster calibration (combination sensor)
and start calibration.
Calibration is then complete.
- Only for vehicles with manual transmission (I-no. 480)
Install gearshift bracket.
- Only for vehicles with PDK (I-no. 250)
Install selector support.