FixVault
Home › Saab › 1985 › 900 S, 2D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › System › Fuel Injection System - Turbo › Testing › Limp-Home Mode

Limp-Home Mode

  1. Connect voltmeter between terminals 1 and 2 of limp-home test connector. See Fig 1 . Start engine. If system is operating properly, meter will read less than 1 volt.
    Fig 1: Saab Limp-Home Test Connector Connector is located near A/C evaporator housing.
    G35438
  2. If system is operating in limp-home mode, meter will indicate battery voltage. If battery voltage is indicated, proceed to AIR MASS METER test.
About FixVault