FixVault
Home › Saab › 1989 › 900 SPG › Repair and Diagnosis › External Pages › Different car › Section 5 (Engine Controls - Tests W/Codes) › Fault Codes (Without Using ISAT Scan Tester) › Error Code 12231

Error Code 12231

WARNING: This page is about a different car, the 1990 Saab 9000 and 1990 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
  1. The check engine light is off. There is no RPM signal. This code will always be present if the test is run with the engine off. Crank engine for 5 seconds. If code disappears, the RPM signal is OK. If code does not disappear, go to step 2.
  2. Check fuse no. 3. Check the ignition system input at pin 1 of the LH control unit.
About FixVault