Cooling Fan Motor (9000 Series)
- For models without air conditioning, go to step 3). For models with air conditioning, unplug connector from cooling fan. Apply 12 volts to both Green/White and White wires together at connector to cooling fan. Connect either Black wire to ground. Replace fan motor if it does not run at high speed.
- Disconnect wiring installed in step 1). Connect 12 volts to Green wire. Connect remaining Black wire to ground. Replace fan motor if it does not run at low speed.
- For models without air conditioning, unplug connector from cooling fan. Apply 12 volts to one terminal of fan connector. Ground remaining fan connector terminal. Replace fan if it doesn't run.