FixVault
Home › Saab › 1995 › 9000 CS, Automatic › Repair and Diagnosis › External Pages › Different car › Section 12 (Engine Controls - System/Component Tests) › Computerized Engine Controls › Electronic Control Module (ECM) (9000 Series With TRIONIC System) › Power Circuit

Power Circuit

WARNING: This page is about a different car, the 1996 Saab 9000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for battery voltage at terminals No. 1 and No. 48 (Pink/White wires). If battery voltage exists, go to next step. If battery voltage does not exist, repair Red wires between ECM and fuse panel.
  2. Turn ignition on. Check for battery voltage between ECM terminal No. 60 (Yellow/Gray wire) and ground. If battery voltage does not exist, repair open circuit in Yellow/Gray wire.
About FixVault