Stall Speed Test
- Operate engine and transaxle at normal operating temperature. Connect tachometer to vehicle and ensure it is visible to driver. Apply parking brake and block all 4 wheels.CAUTION: DO NOT maintain stall speed RPM for more than 5 seconds. Transaxle damage may occur.
- Ensure A/C is off. Start engine, apply brakes and place transaxle in "D" position. Depress accelerator to full throttle and note maximum RPM obtained. Repeat test in "R" position. For stall speed specifications, see STALL SPEED SPECIFICATIONS table.
STALL SPEED SPECIFICATIONS
| Engine Application | RPM |
|---|---|
| 4-Cylinder | 2150-2450 |
| V6 | 2000-2300 |