Valve Body Solenoids
- Remove transaxle oil pan. Disconnect solenoid wire connector(s). For solenoid wire color identification, see SOLENOID WIRE COLOR IDENTIFICATION table. Using a DVOM, measure resistance between appropriate solenoid terminal and ground. Resistance should be approximately 13 ohms for No. 1, No. 2 and torque converter clutch solenoids. If resistance is not as specified, replace solenoid.
- Using DVOM, measure resistance between pressure control solenoid terminals. Resistance should be about 4 ohms. If resistance is not as specified, replace solenoid.
SOLENOID WIRE COLOR IDENTIFICATION
| Solenoid | Wire Color |
|---|---|
| No. 1 | White |
| No. 2 | Black |
| Pressure Control | Brown |
| Torque Converter Clutch | Yellow |