FixVault
Home › Saab › 2002 › 9-3 SE, 2D Convertible, Automatic › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Removal/Install/Overhaul › Ignition System › Ignition Discharge Module › Removal (4-Cyl)

Removal (4-Cyl)

  1. Unplug the 10-pin ignition discharge module connector. See Fig 1 .
  2. Remove the 4 screws.
  3. Lift up the module.
Fig 1: Removing Ignition Discharge Module (4-Cyl)
G00180883Courtesy of SAAB-SCANIA OF AMERICA, INC.
About FixVault